電纜橋架經常清洗和清理。被油污染的表面和其他東西可以用普通的家用清潔劑清洗。不要使用腐蝕性溶劑，也不要使用洗潔精和電線進行清洗，以免留下劃痕，影響美觀。

Cable trays are frequently cleaned and cleaned. Oil contaminated surfaces and other items can be cleaned with regular household cleaning agents. Do not use corrosive solvents, nor use Dishwashing liquid and electric wires for cleaning, so as not to leave scratches and affect the appearance.

如果污漬難以去除，可用汽油、煤油、柴油、甲苯、二甲苯、苯乙烯、丙酮等清洗。但清洗后需要立即用水清洗，防止其侵入內部結構。

If the stains are difficult to remove, they can be cleaned with gasoline, kerosene, diesel, toluene, xylene, styrene, acetone, etc. But after cleaning, it is necessary to immediately clean with water to prevent it from invading the internal structure.

清理橋架時，電纜橋架應使用硬度低于玻璃鋼的竹片或塑料板，或使用工具刮刀，防止清理時工具刮傷橋架表面。洗的時候可以用汗布、紗布、軟毛巾、軟泡沫等柔軟的材料。

When cleaning the cable tray, bamboo or plastic sheets with a hardness lower than fiberglass should be used for the cable tray, or a tool scraper should be used to prevent the tool from scratching the surface of the tray during cleaning. When washing, you can use soft materials such as sweat cloth, gauze, soft towel, soft foam, etc.

玻璃鋼橋梁應及時清理鹽霜，在該海域航行的船舶應及時清理附著在船舶表面的鹽晶體(鹽霜)。由于鹽晶體在陽光下具有凸透鏡的聚焦作用，表面玻璃鋼電纜橋架在高溫下會加速老化。

Fiberglass bridge beams should be cleaned of salt frost in a timely manner, and ships sailing in the sea area should be cleaned of salt crystals (salt frost) attached to the surface of the ship in a timely manner. Due to the convex lens focusing effect of salt crystals in sunlight, the surface of fiberglass cable trays will accelerate aging at high temperatures.

在設計布線方法和路由選項的安排時，應加以區分。它們既要滿足規范的要求，又要考慮布線的性、可擴展性、經濟性和美觀性，便于維護。

When designing wiring methods and routing options, distinctions should be made. They should not only meet the requirements of the specifications, but also consider the safety, scalability, economy, and aesthetics of the wiring, making it easy to maintain.

山東電纜橋架作為各種電纜敷設的載體，從屬于布線的需要，也應按上述原則執行。由于建筑內各種管線平行交叉，空間有限，尤其是大型寫字樓、金融商業樓、酒店、體育場館等建筑，信息點密集。

Shandong cable tray, as a carrier for various cable laying, belongs to the needs of wiring and should also be implemented according to the above principles. Due to the parallel intersection of various pipelines within the building, the space is limited, especially in large office buildings, financial and commercial buildings, hotels, sports venues, and other buildings, with dense information points.

除了地板槽和墻壁中的埋管之外，電纜槽廣泛用于豎井和室內天花板中，以提供不同方向的布線。弱電系統的各種電纜按類別分布在橋架內，走線選擇和安裝方式應根據方向的要求，結合建筑結構、空調、電力等。

In addition to buried pipes in floor trays and walls, cable trays are widely used in shafts and indoor ceilings to provide wiring in different directions. The various cables of the weak current system are distributed within the bridge according to their categories, and the selection and installation method of wiring should be based on the requirements of direction, combined with building structure, air conditioning, power, etc.

同時，金屬隔板需要單獨使用，引出電纜應盡量避免平面交叉。當橋梁穿越樓板、墻體或伸縮縫時，應在建筑圖上標出相應的孔洞和位置，避免因疏漏造成施工時臨時打洞，傷害土建結構。為了防止電磁干擾，在橋梁的設計中應考慮橋梁的封閉性。還有什么事項就來我們網站http://m.h3022.cn咨詢！

At the same time, metal partitions need to be used separately, and outgoing cables should try to avoid flat crossing. When the bridge passes through the floor slab, wall or Expansion joint, the corresponding holes and positions shall be marked on the architectural drawing to avoid temporary holes during construction due to negligence and damage to the civil structure. In order to prevent electromagnetic interference, the closure of the bridge should be considered in the design of the bridge. If there are any other matters, please come to our website http://m.h3022.cn consulting service